rfo Are you tired of looking at your old, worn-out Delta shower handle? Does it no longer provide the same level of comfort and performance that it used to? If so, consider replacing the handle. In this article, we will walk you through a complete guide on the delta shower handle replacement and making it look new again! Read on for more!
Introduction to Delta Shower Handles
Assuming you have a Delta shower, you may need to replace the handle at some point. The good news is that this is a relatively easy process that anyone can do with a few tools. This guide will show you how to replace your Delta shower handle and make it look new again.
First, you’ll need to gather the following tools: a Phillips head screwdriver, a flathead screwdriver, and pliers. You may also need a hammer if your handle is stuck on tight.
Once you have your tools, follow these steps:
1. Remove the old handle by unscrewing the two screws that hold it in place. If the screws are stripped, or the handle is stuck on tight, use a hammer to gently tap them loose.
2. Once the screws are removed, pull the old handle off the stem. Be careful not to lose any washers or other small parts.
3. Take a look at the new handle and familiarize yourself with its parts. Two washers and a plastic retaining ring should hold everything in place.
4. Slide the new handle onto the stem and align it with the holes for the screws. Insert the two screws and tighten them until they’re snug but not too tight. You don’t want to strip them again!
5 . Finally, reattach the plastic retaining ring if one is present. Make sure it’s fully
Necessary Tools for Replacement
1. A Phillips screwdriver
2. A pair of slip-joint pliers
3. A Allen wrench or hex key
4. A putty knife (if needed)
5. A new Delta shower handle
6. Replacement screws (if needed)
Step-by-Step Guide on How to Replace the Handle
If your Delta shower handle is damaged or worn out, it’s important to replace it as soon as possible. A shower handle that’s not working properly can cause water to leak, leading to expensive repairs. Luckily, replacing a Delta shower handle is a relatively easy process that anyone can do with a few simple tools. This step-by-step guide will show you how to replace the handle on your Delta shower, so you can get back to enjoying your daily showers.
1. You’ll need to gather the necessary tools and materials. You’ll need a Phillips head screwdriver, a flathead screwdriver, pliers, and a new Delta shower handle. You can find these items at your local hardware store or online.
2. Once you have the tools and materials, for old delta shower handle replacement. Use the Phillips head screwdriver to remove the two screws holding the handle. Then, use the flathead screwdriver to pry off the plate that covers the hole where the handle was attached.
3. With the old handle and plate removed, look at how the new Delta shower handle will be installed. It’s important to note that there are three different ways that this model of shower handle can be installed – with the screws pointing up, down, or sideways. Make sure you know which orientation your new handle needs before proceeding to the next step.
4 . To install the new Delta shower handle, start by screwing the two mounting screws into the holes where the old handle was attached. Use the Phillips head screwdriver to tighten them securely.
5 . Place the plate over the hole and use the flathead screwdriver to press it into place. Make sure you press it down, so there is no gap between the plate and the wall or surface behind it.
And that’s it! You’ve successfully replaced your Delta shower handle and can now enjoy a more reliable shower experience.
Types of Replacement Handles
When it comes to replacing a delta shower handle, there are three main types of handles that you can choose from. These include:
Standard Replacement Handles: These handles are the most common type of replacement handle for delta showers. They typically come in various colors and finishes, so you can find one that matches your existing delta shower fixtures.
Deluxe Replacement Handles: These handles are designed for those who want a more luxurious look for their delta shower. They often come in chrome or brushed nickel finishes, and they can add a touch of class to any delta shower.
Custom Replacement Handles: If you have specific needs or wants for your delta shower handle, consider getting a custom replacement handle. This option allows you to choose the exact style, finish, and material you want for your new handle.
Tips on How to Make the New Handle Look as Good As New
Assuming that you would like tips on how to make the new handle look as good as new, here are a few:
Make sure to clean the new handle before installation. This will ensure that no dirt or debris could interfere with the handle’s function.
Use a mild abrasive such as a soft cloth and soapy water to lightly scrub any scuffs or marks off the new handle. This will help it blend in with the rest of the shower fixtures better.
If you want extra protection for the new handle, consider applying a clear sealant or lacquer once it has been installed. This will create a barrier against moisture and other elements that could cause corrosion or rust.
Conclusion
“If your old shower handle is starting to look a little worse for wear, it may be time to replace it. This guide will show you how to do just that and make your shower look new again in the process. First, you’ll need to gather a few tools and supplies. You’ll need a screwdriver, a wrench, and some pliers. You’ll also need a new shower handle (of course), which you can find at most hardware stores.
Once you have everything, start by shutting off the water to your shower. Then, remove the old shower handle using the screwdriver and wrench (or pliers, if necessary). Be careful not to damage any surrounding fixtures as you do this.With the old handle gone, attach the new one in its place. Once it’s secure, could you turn on the water and test it out? If all goes well, your new shower handle should be good as new.”
